Skip to main content
Getz Network

Remote charger operations

Run chargers from the office, not from the road

Sites in Southern Africa are far apart and every site visit costs money. Getz Network shows what each charger last reported and lets your operator act on it remotely while it is connected. When a remote command cannot fix a fault, or a charger is offline, an alert can open a work order for the right technician.

Remote operations: every command sent to a charger, with its acknowledgement.

  1. What you see: each command and the charger’s answer
  2. Why it matters: fix most issues without a call-out

What it does

Operate, diagnose, dispatch

  • Remote commands

    Start, stop, reset, unlock a connector, change availability or ask a charger to report. Every command and its result is logged.

  • Alerts with rules

    Offline, faulted, boot loops, firmware failures, error codes, temperature and more, de-duplicated per charger and resolved automatically when the condition clears.

  • Work orders from alerts

    An alert can open a work order with an SLA by priority, a checklist and parts. Taking a charger out of service marks its EVSEs unavailable.

  • Contractors and technicians

    Assign work to your own technicians or to contractors, and keep warranty claims with the charger’s history.

  • Firmware and configuration

    Signed firmware campaigns in waves with automatic pause, and drift detection that puts settings back.

  • Full message history

    Every OCPP message is kept as evidence, so a disputed session or a fault can be traced.

  • SMS and WhatsApp alerts

    Alerts on the phones your technicians already carry, next to e-mail and webhooks.

    Coming soon

  • Edge controllers for offline sites

    A site keeps authorising and charging through a network outage.

    Coming soon

In the product

Alerts that turn into field work

Alerts are raised from charger status, telemetry, firmware and security events, de-duplicated per rule and charger, and show how long a charger has been offline. Operators acknowledge or resolve them, and open a work order when a remote command cannot fix the fault. Alerts also go out by e-mail and as signed webhooks to your own tools.

Alerts raised from charger status and telemetry, de-duplicated per rule and charger, ready to acknowledge, resolve or turn into a work order.

  1. What you see: major alerts (chargers offline) and how long each has been open
  2. Why it matters: a charger that cannot be fixed remotely becomes field work, not a surprise

Questions

Remote charger operations: questions

Does Getz Network reset chargers automatically?

Automatic recovery is limited to safe actions such as reconnecting and a soft reset, and it is off unless you switch it on. More disruptive actions stay with your operators.

How do alerts reach us?

By e-mail and by signed webhook to the tools you already use. SMS and WhatsApp alerts are coming soon.

What if a charger is offline or a command fails?

Remote actions need a connected charger. Every command is logged with the charger’s response, so a rejected or unanswered command is visible, and an offline or faulted charger raises an alert that can open a work order with an SLA for your technician or contractor. Who responds, and what site staff tell drivers in the meantime, is agreed with the operator in the site’s handover.

See remote operations on a live demo

We will walk you through commands, alerts and work orders with demonstration data.