Skip to main content
Getz Network

Hotels and game lodges

Guests arrive on a low battery. Power is precious.

Guests who drive to a lodge on the Garden Route or near the Kruger often arrive after hundreds of kilometres with little charge left, and expect to leave full. Many lodges run on solar, batteries or a generator, with nobody technical on site. Getz Network keeps charging within the power you have and lets your operator look after the chargers from far away.

When the grid goes down, charging drops to what the backup can carry.

  1. What you see: the outage rule, the 30 kW backup limit and the battery reserve
  2. Why it matters: during an outage, charging is capped at the backup-power limit you configure

The problem

The realities of charging at a lodge

Destination charging is a reason to choose your property, as long as it never threatens the lights, the kitchen or the water pumps.

  1. Limited and precious power

    Off-grid or weak-grid lodges depend on solar, batteries and generators sized for guests’ comfort, not for several cars.

  2. Nobody technical on site

    When a charger stops, the nearest technician may be hours away.

  3. Guests expect a full battery

    Overnight charging is often practical, but the available power, the number of cars and arrival times decide how much energy each guest receives.

  4. Guests from many countries

    Lodges on the Garden Route and near the Kruger welcome guests from many countries, and the price on the receipt has to be right in rand, with VAT.

A charger stops at 9pm

Support from far away, without waking the maintenance team

A guest reports that a charger has stopped. If it is still connected, your operator sees its status, sends a reset or unlocks the connector remotely, and each command is logged with the charger’s response. If it is offline, the escalation plan agreed at handover applies.

  • Remote reset, unlock and availability changes, every command logged

Remote operations: every command sent to a charger, with its acknowledgement.

  1. What you see: each command and the charger’s answer
  2. Why it matters: fix most issues without a call-out

How Getz Network helps

How Getz Network helps a lodge

  • A limit your backup system can carry

    During an outage on record, charging is capped at the backup-power limit you configure with your installer.

  • Share power across the night

    The site limit spreads available power across every car charging, so all of them make progress overnight.

  • Remote support

    Your operator can see a charger’s status and reset or unlock it remotely, without a call-out.

  • Priced in rand

    Each site has its own currency and VAT, so the lodge prices guest charging in ZAR with 15% VAT.

  • Found by travelling drivers

    Publish the lodge’s chargers to participating driver apps through Getz Hub, listed with the hotel as a facility.

  • A view for the owner

    A read-only portal so owners or a hospitality group can see how the chargers are used.

Interactive: an outage, step by step

A morning of Eskom load-shedding at one site

Step through a planned outage at a fictional site with a 30 kW backup-power limit. The chart shows the EV charging budget through the morning.

Illustration · synthetic values
Outage window0 kW30 kW60 kW90 kW120 kWBackup-power limit 30 kW07:0009:3010:0011:0012:3013:00

On grid supply07:00 · budget 120 kW · 6 sessions · ≈20 kW each

Grid supply, a normal morning

The EV budget follows grid headroom: 120 kW is available after the building load, about 20 kW for each of the six cars charging.

Getting started

How we would start with a lodge

  1. Step 1: Power review with your installer

    Solar, battery, inverter and generator ratings, the essential loads that come first, and the mobile signal at the bays.

  2. Step 2: Set limits for day, night and outages

    Agree the site limit and the backup-power limit.

  3. Step 3: Commission remotely supported chargers

    Your installer commissions the chargers; your operator supports them remotely.

  4. Step 4: Review after a season

    Review charging logs after real outages and busy weekends, then decide on more bays.

Questions

Hotels and game lodges: questions

We are entirely off-grid. Can we still use Getz Network?

The chargers need a data connection (usually cellular) to reach Getz Network, and charging is managed within the limits you configure. For fully off-grid power we size the limits with your installer during the assessment. Edge controllers that keep charging when the data connection drops are coming soon.

How do guests pay?

Guests can pay in a driver app connected through Getz Hub, or by card at a payment terminal fitted to the charger from a terminal provider connected to Getz Hub, in rand with VAT. You can also issue RFID cards at reception. Walk-up checkout by QR code for guests without an app is coming soon. Who issues the receipt depends on how the guest paid, and is agreed in the assessment.

What can reception tell a guest when a charger stops at night?

If the charger is connected, your operator can reset or unlock it remotely, and every command is logged. If it is offline, remote commands cannot reach it, so reception follows the escalation plan agreed at handover: who to call, and whether a technician comes out. Agree what reception promises overnight before the first guest arrives.

Can we offer charging free to guests?

Pricing is your choice: you set your own tariffs per site. We discuss how you want to charge, include or record guest charging during the assessment.

Plan charging for your property

Tell us about your power system, your guests and your chargers.